Portable car audio bluetooth adapter

Instruction Manual

(Portable Stereo Bluetooth adapter)

Product introduction:

Product feature

1. Designed for changing the ordinary audio (headphones) into the Bluetooth stereo (headphones), simple and generous appearance.

2. Adopt bluetoothV3.0 technology

3. Automatically connect function when power on. The adapter will search last connected device automatically when power on. If the device is within the searching range, it will automatically connect. If not, the adapter will into hibernation status.

4. Using back splint design to make it easy to be used in any place.

5. Using high pressure injection,spraying the UV to make it scratch-resistant.

Product Parameter

Bluetooth protocol:Bluetooth Ver.3.0

Power standards:Class 2

Communication distance:10M

Bandwidth:2.1GHZ (2.402-2.483.5MHZ)

Tarnsmitting sensitivity: about 2dBm

Receiving sensitivity:-85dBm

Audio output interface:3.5mm audio interface

MIC distance: about 1M

DAC SNR:98dB

LED indicator:Power/Match code/Charging

Continuous use time:5 hours

Operating current:35-40 MA

Charging time: about 2 hours

Dimension:62*28*13MM

Operating temperature range:-10-50 degree

Operating humidity range:10-90%

Power supply:

Portable Stereo Bluetooth adapter adopts two power supply mode:

1. By power adapter(Standard adapter,output:5V, 500MA, USB MINI port)

2. By built-in high-performance polymer battery. PCB board has set up the battery charging protection that makes it can work while charging. (Red light is on when charging,after fully charged the red light is off)

On/Off:Slide power switch to ON: power on,red light is on,blue light flashes

Slide power switch to ON: power off,light off.

Bluetooth Pairing and connection:

Take iPad as an example:

1. Click “Settings”

2. Click “General” to enter “Bluetooth”

3. Press “turn on”, the IPAD will automatically search for the receiver,Please make sure that the adapter in a state of code matching.

4. Choose “Smart Bluetooth” then input PIN code: 0000

5.When it says“Connected”,pairing successfully. Adapter can work now.